Skip to main content 
 
   

 

 
       
 

Publications:

  1. Hrubiak A., Beyene A., Yavorskyi Y., Gotsiride I., Ostafiychuk B.; Structural features and electrochemical behavior of amino acid-based biocomposites, Renewable Energy, Volume 254, December 2025, 123758, https://doi.org/10.1016/j.renene.2025.123758
  2. Beyene A., Synopsis of Trending Scenarios and Impacts of Climate Change on the East African Highlands, JOS Vol. 29, no. 2 (June 3, 2025): 147–66, https://jros.scholasticahq.com/article/136497
  3. Kassa Y. B., Baheta T. A., Beyene A., Multi-Criteria Decision-Making Evaluation of Blade Element Momentum Theory Algorithms for Optimal Design of Small-Scale HAWT Blades, International Journal of Energy Research 2025(1):17, DOI:10.1155/er/8862345
  4. Hrubiak A., Gogitidze Z., Poladishvili R., Gugushvili B., Khundzakishvili N., Beyene A. Structural diversity and surface state of biopolymers used as high-performance cathodes for lithium batteries, Energy Reports, 12(1):4427-4437; DOI:10.1016/j.egyr.2024.10.022
  5. Kassa Y. B., Baheta T. A., Beyene. A., Aerodynamic Performance Characteristics of Low Re Airfoils: A Parametric and Multi Criteria Decision Study, Results in Engineering 24:103174, October 2024, DOI:10.1016/j.rineng.2024.103174
  6. Hrubiak A., Beyene A., Gogitidze A., Kieush L., Yastremska H. V., Homenuk I. B., Structural arrangement, electroconductivical and electrochemical behaviours of solid amino acid-based electrodes, Journal of Electroanalytical Chemistry, Vol. 970, 1 October 2024, 118526, https://doi.org/10.1016/j.jelechem.2024.118526
  7. Galeana D., Abebe A., and Beyene A., Application of a Ranque-Hilsch vortex flow in an internal cooling of a gas turbine engine blade, American Society of Mechanical Engineers (ASME) Journal of Engineering, 2024, Vol. 3 / 031006-1
  8. Belayneh Y. K., Aklilu T. B., Beyene. A., Current Trends and Innovations in Enhancing the Aerodynamic Performance of Small-Scale, Horizontal Axis Wind Turbines: A Review, ASME Journal of Engineering, Vol. 3, 2024, https://doi.org/10.1115/1.4064141
  9. Beyene A., Bonse N, Regression Based Comparative Analysis of Pollutants in Biogas and Natural-Gas-Blend Combustion Outputs, International Journal of Global Warming, Vol. 25, No. 2, 2021
  10. Mebrat A, A., Tadesse Y., Beyene A., Design, Simulation, and Experimental Validation of Thermally Infused Hydraulic Ram Pump, Journal of Energy Resources Technology, 2022, 144(2): 022103, Paper No: JERT-20-1728 https://doi.org/10.1115/1.4051211
  11. Galeana, D., Beyene, A., “A Swirl Cooling Flow Experimental Investigation on a Circular Chamber Using Three-Dimensional Stereo-Particle Imaging Velocimetry,” Journal of Energy Resources Technology, 2019, Vol. 142, DO - 10.1115/1.4044575
  12. (10)MacPhee D, Beyene A., Performance Analysis of a Small Wind Turbine Equipped with Flexible Blades, Renewable Energy, Volume 132, March 2019, Pages 497-508
  13. MacPhee D, Beyene A., Impact of Air Quality and Site Selection on Gas Turbine Engine Performance, Journal of Energy Resources Technology Feb 2018, 140(2): 020903, https://doi.org/10.1115/1.4038118
  14. Khojasteh D., Kamali R., Beyene A., and Iglesias G., Assessment of renewable energy resources in Iran; with a focus on wave and tidal energy, Renewable and Sustainable Energy Reviews, Volume 81, Part 2, January 2018, Pages 2992-3005
  15. Capata, R., Beyene, A., “Experimental evaluation of three different configurations of constructal disc-shaped heat exchangers,” International Journal of Heat and Mass Transfer, Volume 115, Part A, December 2017, Pages 92-101
  16. Mari M., Venturini M., Beyene A., Novel Geometry for Vertical Axis Wind Turbines Based on the Savonius Concept, J. Energy Resour. Technol. 139(6), 061202 (Jul 18, 2017), Paper No: JERT-17-1221; doi: 10.1115/1.4036964
  17. MacPhee D, and Beyene A., Fluid-Structure Interaction Analysis of a Morphing Vertical Axis, Wind Turbine, Journal of Fluids and Structures, accepted, Journal of Fluids and Structures 60 (2016), pp. 143-159, DOI information: 10.1016/j.jfluidstructs.2015.10.010
  18. MacPhee D., Beyene A., Experimental and FSI Analysis of a Morphing Wind Turbine Rotor, Energy, The International Journal, Energy 90 (2015): 1055-1065
  19. Anderson M., Beyene A., Integrated resource mapping for wave energy, J. Energy Resour. Technol 138(1), 011203 (2015), Paper No: JERT-15-1095; doi: 10.1115/1.4031673
  20. Butbul J., MacPhee D., Beyene A., The Impact of Inertial Forces on Morphing Wind Turbine Blade in Vertical Axis Configuration, Energy Conversion and Management, Volume 91, 2015, Pages 54–62
  21. Soda M., Beyene A., Multi-phase Ultra-Low Grade thermal energy storage for the organic Rankine cycle, International Journal of Energy Research, (wileyonlinelibrary.com). DOI: 10.1002/er.3300, 2015
  22. Zevenhoven R., Beyene A., Exergy of Nano-Particulate Materials, International Journal of Thermodynamics, 17 (3), 145-151; doi:10.5541/ijot.5000070194, Sept. 2014
  23. Ziviani D., Beyene A., Venturini M, advances and challenges in ORC systems for Low Grade Thermal Energy recovery: a thermodynamic review, Applied Energy. 121. p.79-95, 2014
  24. Shahinfard S., Beyene A., Regression comparison of organic working mediums for low grade heat recovery operating on Rankine cycle, Journal of Power Technologies, Vol 93, No 4 (2013)
  25. Ziviani D., Beyene A., Venturini M, Design, analysis and optimization of a Micro-CHP ORC system for ultra-low grade heat recovery, J. Energy Resour. Technol. 136(1), 011602 (Sep 12, 2013) (11 pages) doi:10.1115/1.4024858
  26. Krawczyk P., Beyene A., MacPhee D., Two-Dimensional Fluid Structure Interaction of a Morphed Wind Turbine Blade, International Journal of Energy Research 37 (14), 1784-1793, 2013. DOI: 10.1002/er.2991
  27. Beyene A., Zevenhoven R. Thermodynamics of Climate Change, Int. J. of Global Warming, Vol. 5, No. 1, 2013
  28. MacPhee D., Beyene A., Recent Advances in Rotor Design of Vertical Axis Wind Turbines, Wind Engineering 36(6), 647–666 (2012)
  29. MacPhee D., Beyene A., Fluid-Structure of a Morphing Symmetrical Wind Turbine Blade Subjected to Variable Load, International Journal of Energy Research, Volume 37, Issue 1, pages 69–79, January 2013
  30. Garoma T., Khaled B. M., and Beyene A., Comparative Resource Analyses for Ethanol Produced from Corn and Sugarcane in Different Climatic Zones, Journal of Energy Research, Volume 36, Issue 10, pages 1065-1076, 2012
  31. MacPhee D., Dincer I., Beyene A., Energy and Exergy Analyses of the Charging Process in Encapsulated Ice Thermal Energy Storage systems, Volume 41, Issue 1, May 2012, Pages 491–498
  32. Firat C., Beyene A., Comparison of direct and indirect PV power output using filters, lens, and fiber transport, Energy - The International Journal, Energy 41 (2012) 271-277.
  33. Puterbaugh M., Beyene, A., “Parametric Dependence of a Morphing Wind Turbine Blade on Material Elasticity,” Energy 36 (1) (2011), pp. 466–474
  34. Zevenhoven R., Beyene, A., The Impact of Waste Heat Rejection on Global Warming Greenhouse Gas Emissions or of Heat-up of the Surrounding by Power Plants, Energy, Volume 36: 6, June 2011, Pp. 3754-3762
  35. Hoogedoorn E., Jacobs G., Beyene A., Aero-elastic Behavior of a Flexible Blade for Wind Turbine Application: A 2D Computational Study, Energy, Volume 35, Issue 2, February 2010, Pages 778-785
  36. Beyene A., Adaptive Geometry, WindTech International, October 2009
  37. Beyene A., Peffley J., Constructal Theory, Adaptive Motion and Their Theoretical Application to Low Speed Turbine Design, American Society of Civil Engineers, Journal of Energy Engineering, Vol. 135, No 4, Pages 112-118, Dec. 2009
  38. Talom L. T., Beyene A., Heat Recovery from Automotive Engine, Applied Thermal Engineering, Vol. 29, 2-3, 2009, Pages 439-444
  39. Husband W. W., Beyene A., Low Grade Heat driven Rankine cycle, a feasibility study, International Journal of Energy Research, Volume 32, Issue 15 , Pages 1373 - 1456 December 2008
  40. Sclafani A., Beyene A., Sizing CCHP Systems for Variable and Non-Coincident Loads, part 2, operating strategies, Cogeneration and Distributed Generation Journal, Vol. 23, Number 4 / Fall 2008, Pages 6 - 28
  41. Moman A., Beyene A., Exergy Analysis of Energypark, International Journal of Exergy, Vol. 5, No 3 / 2008, Pages 341 - 359
  42. Sclafani A., Beyene A., Sizing CCHP Systems for Variable and Non-Coincident Loads, Part 1: Load profiling and equipment selection, Cogeneration and Distributed Generation Journal, Volume 23, Number 3 / 2008, Page 6 - 19.
  43. Beyene A., Wilson J., Wave Energy Conversion: Prospects and Challenges, Sea Technology, Vol. 49, No. 5, page 43-46, May 2008
  44. Beyene A., Wilson J., Digital Mapping of California Wave Energy Resource, International Journal of Energy Research, Vol. 31, page 1156-1168, 2007
  45. Wilson H. J., Beyene A., California Wave Energy Resource Evaluation, Journal of Coastal Research, Vol. 23, No. 3, page 679-690, May 2007
  46. Lambert M., Beyene A., Design of Solar Powered Adsorption Heat Pump with Ice Storage, Applied Thermal Engineering, Vol. 27, p. 1612-1628, 2007
  47. Beyene A., Moman A., Process Oriented Industrial Energy Intensity Classification, Applied Thermal Engineering, 2006, Vol. 26, 2079-2086
  48. Beyene, A., Lambert M., Sizing Oxidation Systems as Heat and Power Recovery, International Journal of Energy Research, 2006, Vol. 30, p. 823-834
  49. Beyene, A., Wilson H. J., Comparison of Wave Energy Flux for Northern, Central, and Southern Coast of California Based on Long Term Statistical Wave Data, Energy: the International Journal, Elsevier, 2006, Vol. 31, p. 1520-1533
  50. Beyene A., Wilson H. J., Parameter Variation and Part-load Efficiencies of Wave Energy Conversion, American Society of Civil Engineers (ASCE), Journal of Energy Engineering, April 2006, Vol. 132: 1, p. 15
  51. Beyene A., Combined Heat and Power as a Feature of Energypark, ASCE Journal of Energy Engineering, December 2005, Vol. 131:3, p.173, lead article
  52. Beyene, A., Wilson H. J., Wave Energy Capacity and Part-load Operation, Sea Technology, pp 45-48, July 2005 (invited)
  53. Beyene A., Energy Efficiency and Industrial Classification, Energy Engineering Journal, pp. 59-80, Vol. 102, No.2, 2005
  54. Beyene A., Sizing Industrial CHP for Maximum efficiency, Journal of Cogeneration and on-site Power Production, pp 45-49, Vol. 4, #1, 2003
  55. Luz-Silveira J., Beyene A., Leal E., Santana J., Okada D., Thermoeconomic Analysis of a Cogeneration System, Journal of Applied Thermal Engineering, vol. 22, pp 1471-1483, 2002
  56. Beyene A., Fractional Horsepower Motor/Fan Performance, International Journal of Power and Energy Systems, lead article, Vol. 20, No 2, pp 53-57, 2000
  57. Beyene A., Intermediate Technology for Underdeveloped Nations, the Journal of Oromo Studies, Vol. 7, pp. 57-85, 2000
  58. Beyene A., and Lowrey P., Strategies to Raise the Off-Design Efficiency of Chiller Machines, International Journal of Energy Research, vol. 20, pp 625-636, 1996
  59. Beyene A., The Significance of Bita Qara, The Journal of Oromo Studies, Vol. 2, pp. 58-64, 1996
  60. Beyene A., Chiller Performance Evaluation, ASHRAE Journal - lead article, pp 36-44, June 1995
  61. Beyene A., Guven H., Jawdat Z., and Lowrey P., Conventional Chiller Performances: Simulation and Field Data, International Journal of Energy Research, vol. 18, pp 391-399, 1994
  62. Beyene A., Miller A., Analysis of Gas Turbine Engine Arrangements, The Archive of Mechanical Engineering, Warsaw, Poland, Vol. XLI, 3-4, pp. 193-218, 1994
  63. Liu K., Guven H., Beyene A., and Lowrey P., Evaluation and Comparison of Field Performance of Thermal Energy Storage and Conventional Chillers, Energy - The International Journal, Vol. 19, No. 8, 889-900, 1994
  64. Beyene A., Miller A., A Numerical Procedure For Simulation of the Gas Turbine Engine, Mathematical Modeling and Scientific Computing, Vol. 1, No. 5, 522-536, 1993
  65. Beyene A. Miller A., Review and Comparison of Methods for Predicting Losses in Cascades of Turbine Profiles, Bulletin of The Institute of Heat Engineering, 68, Warsaw, Poland, 1986
    66. Articles in efereed Proceedings:
  66. Jamal V.S, Beyene A., Performance of a novel, flapping vertical axis wind turbine of the Savonius derivative, The 38th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June - 4 July 2024, Paris, France
  67. Kassa Y.B., Baheta T.A., Beyene A., Performance of compounded airfoils for wind turbine application, The 38th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June - 4 July 2024, Paris, France
  68. Hrubiak A., Beyene A., Yavorskyi Y., Ostafiychuk B., Structural, conductive, and electrochemical properties of carbon-based bio-composites formed by mechano-synthesis, The 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 30 June - 5 July 2024, Rhodes, Greece
  69. Beyene A., Sciubba E., The Hess-Murray law and the "optimal" radius ratio in natural bi- and trifurcated vessels: a rejoinder, based on dimensional analysis, The 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 30 June - 5 July 2024, Rhodes, Greece
  70. Galeana D., Abebe A., and Beyene A., Internal cooling of a gas turbine blade using Ranque-Hilsch vortex flow, Proceedings of ECOS 2022 - The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 25-30, 2023, Gran Canaria, Spain
  71. Beyene A., mini-keynote, theoretical application of biomimicry in fluids, The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 25-30, 2023, Gran Canaria, Spain
  72. Mebrat A., Galeana D., Beyene A., Vortex cooling of a gas turbine blade: comparison of single and bidirectional swirl formation, Proceedings of ECOS 2022 - The 35rth International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Copenhagen, Denmark, July 3 - 7, 2022
  73. Galeana D., Mebrat A., Beyene A., Computational and Experimental Study of Vortex Cooling Using CFD, 3-D PIV, and Liquid Crystals, Proceedings of ECOS 2022 - The 35rth International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Copenhagen, Denmark, July 3 - 7, 2022
  74. Mebrat A. A., Tadesse Y., Beyene A., Feasibility of Thermally Infused Water Hammer for Dual Application, Proceedings of ECOS 2021 - The 34rth International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 27-July 2, 2021, Taormina, Italy
  75. Capata R., Beyene A., On Board Applications of a Reformed Methanol Fuel Cells Plant, Proceedings of ECOS 2021 - The 34rth International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 27-July 2, 2021, Taormina, Italy
  76. Galeana D., Beyene A., Experimental Heat Transfer Study Using Liquid Crystals on a Swirl Cooling Flow Circular Chamber with and without Elbow, Proceedings of ECOS 2021 - The 34rth International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 27-July 2, 2021, Taormina, Italy
  77. Bonse N., Beyene A., “Regression Based Pollutant Ranking of Combustion Outputs,” Proceedings of ECOS 2020 - the 33RD International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 29-JuLY 3, Osaka, Japan, 2020
  78. Mirich C. J., Beyene A., “Surf Vehicle for Paraplegic Surfer,” Proceedings of ECOS 2020 - the 33RD International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 29-JuLY 3, Osaka, Japan, 2020
  79. Galeana, D. and Beyene, A., “Liquid crystals and 3-D stereo-PIV used for heat transfer and swirl cooling flow study in a circular chamber with and without elbow,” Proceedings of ECOS 2020 - the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Wroclaw, Poland, 2019
  80. Galeana D., Beyene, A., “Experimental Investigation of Heat Transfer and Swirl Cooling Flow in a Circular Chamber Using Liquid Crystals and 3-D Stereo-PIV,” in Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guimaraes, Portugal, 2018
  81. Galeana D., Beyene, A., “Experimental Study of Swirl Cooling Flow on a Circular Chamber Using 3-D Stereo-PIV,” in Power & Energy Conference & Exhibition ASME, Lake Buena Vista, FL, USA, 2018
  82. Galeana D., Beyene, A., “Experimental Approach on a Swirl Flow and Heat Transfer Coefficient Using a 3-D Stereo-PIV and Liquid Crystals,” in 5thInternational Conference on Heat Transfer and Fluid Flow (HTFF'18), Madrid, Spain – August 16 – 18, 2018
  83. Beyene A., Advances in wind energy conversion (keynote speech) Congress on Wind and Renewable Energy Conference, June 14-16, 2018, London, UK
  84. Galeana D., Beyene A, 3 Stero-PIV swirl flow field and transient liquid crystal wall temperature measurements on a circular chamber, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 17-22, Guimaraes, Portugal
  85. Krasheninnikov I., Asfaw Beyene A., Part load study of twin-screw expander for low grade thermal energy conversion using organic Rankine cycle, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 17-22, Guimaraes, Portugal
  86. Ting L. C., Beyene A., The Impact of Blade Thickness on the Structural and Aerodynamics Performance of a Morphing Wind Turbine Blade, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 17-22, Guimaraes, Portugal
  87. Mari M., Venturini M., and Beyene A., Performance Evaluation of a Savonius Wind Turbine with Morphing Blades, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 2. - 6. 2017, San Diego, California, USA
  88. Danieli P., Beyene A., and Lazzaretto A., Experimental analysis of a novel Savonius based spline geometry with flexible blades for vertical axis wind turbines, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 2. - 6. 2017, San Diego, California, USA
  89. Mari M., Venturini M., Beyene A., performance evaluation of novel spline-curved blades of a vertical axis wind turbine based on the Savonius concept, IMECE2016-65122, Proceedings of IMECE 2016, International Mechanical Engineering Congress & Exposition, November 11-17, 2016, Phoenix, Arizona. 
  90. Beyene A., Advances in morphing wind turbine blade for wind energy conversion (KEYNOTE SPEECH), Wind Energy – 2016, July 28-30, Berlin, Germany.
  91. Asefa A, Beyene A. Seasonal climate scatter as a climate change indicator, International Conference on Climate Change: Impacts & Responses, Vietnam National University, 21-22 April 2016, Hanoi, Vietnam. 
  92. Elgin A., Beyene A., Design Challenges of Low Grade Heat Recovery ORCs for Low Power Output: Experiences from a Prototype Design, Proceedings of 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 19. - 23. 2016, Portorož, Slovenia.
  93. MacPhee D., Beyene A., Flexible Blade Design for Horizontal Axis Wind Turbines, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 19 – 23, 2016, Portorož, Slovenia.
  94. MacPhee D., Beyene A., The Impact of Air Quality and Site Selection on Gas Turbine Engine Performance, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 19. - 23. 2016, Portorož, Slovenia.
  95. Beyene A., Sciubba E., Tocci L., Toro C.,Modelling and simulation of waste heat recovery systems for marine applications, Proceedings of 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June ‐ 3 July 2015 in Pau, France.
  96. Ziviani D., Beyene A. and Mauro Venturini M., Development of a general organic Rankine cycle simulation tool: ORCSIM, Proceedings of 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June ‐ 3 July 2015 in Pau, France.
  97. Stiber B., Asfaw Beyene A., Impact of wave energy conversion on sediment transport, Proceedings of 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June ‐ 3 July 2015 in Pau, France.
  98. MacPhee D., Beyene B., Aeroelastic Behavior of a Morphing Wind Turbine Rotor in Varying Wind, Proceedings of 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 29 June ‐ 3 July 2015 in Pau, France.
  99. Anderson M., Beyene A., Matching of Wind and Wave Energy Conversion for an Integrated Design Concept, Proceedings of the 2015 ASME Power & Energy Conference, PowerEnergy2015, June 28-July 2, 2015, San Diego, California, USA, PowerEnergy2015 - 49108
  100. MacPhee D., Beyene A., Performance investigation of a small horizontal axis wind turbine equipped with flexible blades, Proceedings of the 2015 ASME Power & Energy Conference, PowerEnergy2015, June 28-July 2, 2015, San Diego, California, USA. PowerEnergy2015 - 49122
  101. MacPhee D., Beyene A., A Morphing Blade Design for Vertical-Axis Wind Turbines, Congress on Applied Mathematics, Modeling and Computational Science (AMMCS) and the Canadian Applied and Industrial Mathematics Society (CAIMS), Waterloo, Ontario, Canada, June 7 – 12, 2015
  102. Stiber B., Beyene A., Wave-Powered Desalination, Proceedings of the 2015 ASME Power & Energy Conference, PowerEnergy2015, June 28-July 2, 2015, San Diego, California, USA, PowerEnergy2015-49087 
  103. MacPhee D., Beyene A., and Nojumi M., The Impact of Air Quality on Gas Turbine Engine Performance, Proceedings of 27th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 15 - 19, 2014, Turku, Finland
  104. Szabłowski L., Beyene A, Pyrolysis of multi-phase media with thermal energy recovery, Proceedings of 27th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 15 - 19, 2014, Turku, Finland
  105. Garoma T., Beyene A., Crude Glycerol as Feedstock for Biofuel Production, 10th International conference on Renewable Resources & Biorefineries, 4 – 5 – 6 June, 2014 , Valladolid, Spain
  106. Soda M, Beyene A., Multi-phase Ultra-Low Grade thermal energy storage for the organic Rankine cycle, 13th International Conference on Clean Energy 2014, Istanbul, June 8-12, 2014
  107. Zaviani D., Venturini M., Beyene A., Comparison of a single screw and scroll expander under part-load conditions for low-grade heat recovery ORC systems, ICAE2014, May 30 - June 2, 2014, Taiwan
  108. Beyene A., Sustainability of Underground Water and Energy Extraction, the European Conference on Sustainability, Energy and the Environment, Thistle Hotel, Brighton, UK from July 4-7 2013
  109. Stiber B., Beyene A., Towards Integrating Desalination and Wave Energy Conversion Technologies, Proceedings of ECOS, 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 16 – 19, 2013, Guilin, China
  110. Shahinfard S., Beyene A., Selection of organic working mediums using regression analysis, Proceedings of ECOS, 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 16 – 19, 2013, Guilin, China
  111. Zevenhoven R., Beyene A., Exergy of nano-particulate materials, Proceedings of ECOS, 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 16 – 19, 2013, Guilin, China 
  112. Beyene A., Muleta K.M., Water Extraction, Ground Thermal Loss, and Land Subsidence: are Geothermal-plants Sustainable? Proceedings of ECOS, 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 16 – 19, 2013, Guilin, China
  113. Ziviani D., Beyene A., Venturini M, Application of an Advanced Simulation Model to a Micro-CHP ORC-Based System for Ultra-Low Grade Heat Recovery, Proceedings of IMECE 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, received BEST PAPER AWARD
  114. Ziviani D., Beyene A., Venturini M, Development and Validation of an Advanced Simulation Model for ORC-Based System, Proceedings of IMECE 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas
  115. Beyene A., MacPhee D., Zevenhoven R., Anthropogenic Heat and Exergy Balance of the Atmosphere, Proceedings of ECOS, 25th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 26, 2012 – June 29, 2012, Perugia, Italy
  116. Beyene A, Hochman J., the CHP Experience in California: Inputs from the Field, International Energy and Sustainability Conference 2012, Shaping the Future Through Smart Grid Technologies, March 22 & 23, 2012 Farmingdale State College, Farmingdale, NY
  117. Beyene A., Garoma T., MacPhee D., Integrated Design of Solar and Algae Plant, SET2011, 10th International Conference on Sustainable Energy Technologies, İstanbul, Turkey, Sep. 4-7, 2011
  118. MacPhee D., Beyene A., Assessing the Stall Characteristics of a Flexible Blade: A 2D Computational Study, World Engineers Convention, September 4-9, 2011, Geneva
  119. MacPhee D., Beyene A., A flexible turbine blade for passive blade pitch control in wind turbines, The Power Engineering and Automation Conference, September 8-9, 2011, Wuhan, Hubei, China
  120. Beyene A., MacPhee D., Integrating Wind and Wave Energy Conversion, 2nd International Conference on Electrical and Control Engineering, Sep 16-18, 2011, Yichang, China
  121. Krawczyk P., Beyene A., Two-dimensional fluid structure interaction of a morphed wind turbine blade, 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 14, 2010 – June 17, 2010, Novi Sad, Serbia
  122. Malavolta M, Beyene A., Venturini M.: Experimental Implementation of a Micro-Scale ORC-Based CHP System for Domestic Applications, Proceedings of ASME 2010, International Mechanical Engineering Congress & Exposition, November 12-18, 2010, Vancouver, British Columbia, IMECE2010-37208.
  123. Firat C., Beyene A., Optical filters, concentrators, and fiber transmitters for PV energy conversion, Proceedings of ECOS 2010, 23rd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010.
  124. Beyene A., Mangalekar D., “Part-load performance of twist-coupled flexible turbine blade at low Reynolds number”, Proceedings of ECOS 2009, 22nd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems August 31 – September 3, 2009, Foz do Iguaçu, Paraná, Brazil.
  125. Zevenhoven R., Beyene A., Global warming: a result of greenhouse gas emissions or of heat-up of the surroundings by power PLANTS, Proceedings of ECOS 2009, 22nd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems August 31 – September 3, 2009, Foz do Iguaçu, Paraná, Brazil.
  126. Beyene A., Energy Efficiency Opportunities, for the Industrial Sector, IAC Experience, Association of Energy Engineers, West Coast Energy Management Congress, Long Beach, CA , June 10-11, 2009.
  127. Husband W. W., Beyene A., Feasibility Study of Low Grade Heat Recovery Rankine Cycle Using Ozone-neutral Refrigerant, Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008-51537, Berlin, Germany, June 9-13, 2008.
  128. Hoogedoorn E. E., Jacobs B. G., Beyene A., Effect of Flexibility on Part-load Performance of Wind Turbine Blade: an Aerodynamic Study, 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Krakow, Poland, 24-27 June 2008.
  129. Talom L. H., Beyene A., Application of Exhaust heat for Absorption Chiller, 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Krakow, Poland, 24-27 June 2008.
  130. Peffley J., Sun L., Beyene, A., Adaptive Motion and its Theoretical Application to Low Speed Turbine Design, ECOS 2007, Padova, Italy, June 25-28, 2007.
  131. Peffley J., Beyene, A., A Morphing Blade for Wave and Wind Energy Conversion, OCEANS '07, IEEE Conference, Aberdeen, June 18-21, 2007.
  132. Moman A., Beyene, A., Exergy Analysis of Energypark, International Exergy, Energy and Environment Symposium, Evora, Portugal, July 1-5, 2007
  133. Beyene A. and Moman A., Process Oriented Matching and System Optimization of Energyparks, 19th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Capsis Hotel, Aghia Pelagia, Crete, Greece, 12-14 July 2006
  134. Beyene A., Wilson J., Digital Mapping of California Wave Energy Resource, International Green Energy Conference, Oshawa, Canada, June 24-29, 2006
  135. Beyene A., Wilson J., Wave Energy Conversion in a Strongly Variable Sea State, EnergyOcean 2006, San Diego, June 21 – 24, 2006
  136. Beyene A., Mangalekar D., Miller R., Alexander S., Villegas S., A New Turbine Concept, Oceans'06 Asia Pacific, IEEE, Singapore, May 16-19, 2006
  137. Beyene A., Wilson J., Matching wave energy capacity and efficiency at part-load, Combined OCEANS'04 MTS/IEEE/TECHNO-OCEAN'04annual conference Kobe, Japan, November, 2004 
  138. Beyene A., Application and conceptual review of entropy, 17th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy and Process Systems, Guanajuato, Mexico, July, 2004
  139. Beyene A., Wilson J., Comparison of California’s Wave Energy Density North and South of Point Conception Based on Long-term Statistical Wave Data, Palm Beach, Florida, 2004
  140. Beyene A., Erpelding, B., ”Smart” Simulation of CHP systems, World Energy Engineering Congress, Atlanta, November, 2003
  141. Erpelding B., Beyene A., A comprehensive combined Heat and Power Sizing Software, 16th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy and Process Systems, Copenhagen, Denmark, July 2003
  142. Beyene A., Sizing combined heat and power as waste heat recovery, ASME TURBO EXPO Atlanta, June, 2003
  143. Beyene A., Potentials and challenges of Industrial Energy Efficiency in Southern California, 15th International Conference on Efficiency, Costs, Optimization, Simulation, and Environmental Impact of Energy Systems, Berlin, Germany, pp 1286-1293, July 3-5, 2002
  144. Beyene A., Combined Heat and Power Sizing Methodology, ASME Turbo Expo 2002, Industrial and Cogeneration, June 3-6, Amsterdam, The Netherlands, GT-2002-30567, 2002
  145. Beyene A., Defining the quality of indoor air supply based on dilution and ventilation concepts, Proceedings of the ASME Advanced Energy systems Division, ASME International Mechanical Engineering Congress and Exposition, Anaheim, AES-Vol. 38, pp. 27-34, 1998
  146. Beyene A., Fredlund, T., Comparative Analysis of Gas Turbine Engine Starting, 98-Land, Sea & Air Turbo Expo, 43rd Gas Turbine & Aeroengine Congress, ASME, Stockholm, Sweden, 98-GT-419, 1998
  147. Beyene A., Fractional Horse-Power applications and Performance, International Conference on High Technology in the Power Industry, Orlando, Florida, pp 478-483, October 27-30, 1997
  148. Beyene A., Miller A., A New Numerical Procedure for Simulation of the Gas Turbine Engine, Proceedings of the ASME Advanced Energy systems Division, AES-Vol. 36, ASME International Mechanical Engineering Congress and Exposition, Atlanta, pp 517-526, 1996
  149. Beyene A., Miller A., The Gas Turbine Engine: Configuration and Performance, Thermal and Fluids Engineering forum, Canadian Society of Mechanical Engineering, Toronto, May 7-9, pp. 320-328, 1996
  150. Beyene A., Miller A., Analysis of Gas Turbine Engine Arrangements, The Archive of Mechanical Engineering, Warsaw, Poland, Vol. XLI, 3-4, pp. 193-218, 1994
  151. Guven H., Beyene A., Comprehensive Performance Indicators of TES Systems, ASHRAE Annual Meeting, Denver, June 1993
  152. Beyene A., Thermal Energy Storage Systems That Save Energy in Addition to Load Shift, ASHRAE Annual Meeting, Denver, June, 1993
  153. Beyene A., Miller, A., Computer Aided Generation of the Gas Turbine Engine Design Schemes, Technology of Turbomachinery, VI Technical Science Conference, Rzeszow, Poland, 1988
  154. Beyene A., Miller, A., An overview of Mathematical Modeling and Simulation of Steady State Gas Turbine Engine Behavior, XIII Congress of the Thermodynamicists, Bielsko Biala, Poland, 1987
  155. Beyene A., Miller A., Off-Design Performance Simulation of Gas Turbine Engine, 26th Symposium on Modeling in Mechanics, Kudowa Zdroj, Beskid Silesian, Poland, 1987

 

  
    HOME  |   RESEARCH   |  CENTERS   |   FUNDING  |   PUBLICATIONS   |   MEDIA  |   LINKS
   

NOTE: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view; download Adobe Acrobat Reader.